Product Description
Our fasteners work with many brands of pneumatic tools like Bostitch, DeWALT, Senco, Paslode, Duo-Fast, Hitachi, Makita, Porter Cable and more. If your tool model number is listed below and our fastener fits within the size range of your tool, our fastener will work. We use only high quality collation materials and glues to keep the fasteners together before and during use. Use B&C Eagle fasteners for more positive drives, fewer jams and lasting quality. Please make sure you select the right coating for your application. Bright fasteners should only be used for interior applications in non-treated lumber. Hot Dip Galvanized fasteners are for interior or exterior applications in treated lumber. For the best corrosion protection available, always use Stainless Steel fasteners. Visit our website at www.bandceagle.com or give us a call for more technical information or if you have any questions on our fasteners. ***As of July 1st 2013 we’ve updated all of our packaging. Buy with confidence that you will receive our product shipped from AMAZON.COM intact. *** These fasteners are ENGINEERED TO FIT: Accuset: A100LS, A150LS, B&C Eagle: NS1840-II, BEA: 90/25-552, 90/32-611, 90/38-150, 90/40-621, BLACK & DECKER: FSNS125, Bosch: STN150-18, Bostitch: SFS100K, Campbell Hausfeld: CHG00100AV, CHN10399, CHN10499AV, NB006499, SB3232MVRB, SN258K, SN258KMVRB, DeWALT: D51420K, D51422K, Duo-Fast: DNS-1840, KB-1836, KN1848A, SURE SHOT 1832, SURE SHOT 1848, SURESHOT 1848F, SURESHOT 1848SL, Fasco: F20P 90-25, F20T 90-30 CT, F20T 90-40 CT, F21P 90-25A, F21T 90-40A, F25A-90/40, F3C 90-40 CT 1, Hitachi: N3804AA, N3804AB, N3804AB2, N3804AB3, Makita: AT638, Max: TA238/18-6, Porta-Nails: 610, Porter Cable: NS100A, NS100B, NS150A, NS150B, Ridgid: R150 FSA, Senco: FINISHPRO 2N1, KN4450, LN4450, SKSXP, SLS15MG, SLS18, SLS18MG, SLS20XP, SLS20XP-L, SLS25XP, SLS25XP-L, Spotnail: FS4825, HL3852, TS4825, WS4840, WEN: 61710. PLEASE CONSULT YOUR TOOL OWNER’S MANUAL FOR SIZE RANGES. For the most up to date list of tools this fastener is compatible with, please visit our website at www.bandceagle.com
From the Manufacturer
3/4 in. 18 gauge galvanized finish staples 1/4 in. crown fits the following stapler guns: Senco LN4450, SKS-L, SLS20, SLS18; Hitachi N3804A; Duo-Fast 1800; Porter Cable NS100A, NS150A, NSS150; Airy EZ-2; Accuset A150LS, A100LS.
- Compatible with a variety of staple guns
- Durably made
- Available in a 5000 count
- For use in 1/4-Inch narrow crown finish staplers (Senco style)
- Great for fascia and soffits, molding, cabinets, trim, casebacks, lattice, paneling, drawers, upholstery and more
- Electrogalvanized finish helps resist corrosion and rust, recommended for interior use only
- Chisel Point
- Reclosable box helps protect product during storage







Jennifer Wilson –
3/4 inch is what I needed for a recent square foot gardening grid project. In my town I could only buy 3/4 as part of a variety pack, 300 each for $10… I needed 148, already had thousands of the two other sizes. I purchased them, so I could do my project that day, and I purchased these so I would never be gouged like that again. I am all for “shop local” until they can’t get what I need (which they (ACE Hardware) said they couldn’t order them in just that size) or they price gouge. When I can drive 160 miles round trip to SLC and save money accounting for fuel and time, or order it on Amazon for halfβ¦.Also, I tested them in my Ryobi and they work.
HappyShopper –
Very good…no issues at all. I have been using these with my 18gauge airstrike Ryobi stapler to lay 1/4 inch underlayment thin plywood thru 3 big rooms (in preparation for laying Luxury Vinyl Plank). …that’s alot of staples!This is a good size for my subfloor with the underlayment.
J. E. G. –
Worked well with my Ryobi crown stapler installing 1000+ sq ft of subfloor. No jams.
FENT –
Great staples, no jamming
snarf –
I needed shallowgalvanized staples to attach cement board to a 3/4 plywood substrate for a faux fireplace surface. These worked well, with good penetration. There was some bending of the staples, but it was less than 5% of what I used and was expected due to the toughness of the cement board. I wish they sold smaller quantities, but at least I’ll never need to purchase another pack of these because I have over 900 left.
Pasha –
The struggle with other brands is poor choice of packaging. This one was well packaged, staple rows were all in one piece and work great assembling cabinets.
sticksandstitches –
We have bought these in 1/2 inch, three-quarter inch, and 1 inch. They feed perfectly in our stapler. No complaints.
Kent L. –
Needed a fastener to staple down my shake shingles on my Free Little Library roof. These fit my staple gun absolutely perfect and fastened down the shingles with perfection. I liked their performance so well, I bought boxes of 3/4″ long, 1″ long, and 1.5″ long staples.