New 🥰 Jitterbug Random Orbital Air Palm Sander, 8″, Industrial Duty, Pneumatic Finish Sander Tool, 8,000 RP 😀

8 reviews for New 🥰 Jitterbug Random Orbital Air Palm Sander, 8″, Industrial Duty, Pneumatic Finish Sander Tool, 8,000 RP 😀

1. 

   Rated 4 out of 5

   joseph.staudenraus – May 24, 2017

   For me specifically…For the price…Yes…… But buyer beware!!! If you do not have extensive experience and the correct tools, you will not be able to remove the manufacture air hose nut. Sander had an air-hose nut/plug which was glued and rusted over the air hose mount. It was impossible to put this tool into operation because the airline input was effectively welded shut. Not sure why they ship a product with a major defect. I had to use a series of applications to remove the air-line block. I spent probably an hour heating, clamping and oiling to put the tool into operation. If you don’t mind fixing a tool that arrives in the mail, it’s all good. Price,… really not bad.

2. 

   Rated 5 out of 5

   ryan stoneridge – February 10, 2018

   I’ve been doing body work for over 30 yrs and have spent hundreds more on tools that don’t match up to this one. even if it brakes I can buy 8 more until I reach the cost of a name brand one.

3. 

   Rated 5 out of 5

   Walter H. – April 6, 2019

   It was just what was described works good can’t beat it for the price.

4. 

   Rated 4 out of 5

   Brad H. – June 1, 2020

   I rather expected it to be dead by the time I finished the sanding project that I had. 5 hard days of use wet sanding under a near constant water flow. It’s still going strong, but it’s happily put away… Until the next big project!

5. 

   Rated 4 out of 5

   Sierra Tango – June 16, 2020

   It’s cheap and the quality is not so great, but it does work well and I think it will work even better when broken in…if it does not fail.It comes with a big steel plug in the air inlet that you will have to remove. They put this in with locktite and I had to use an air impact wrench to get it out.Beware that these things use a lot of air, and by “a lot” I mean like a whole bunch of air. My compressor is big, 14 cfm @ 90 PSI with a 60 gallon tank and I have no problem. If you have a small compressor…forget it.

6. 

   Rated 4 out of 5

   Raygo – October 12, 2020

   Price is right,sander is solids and works great but only been using it for a short time, doing body work on my 98 Dakota sport , time for some new paint .

7. 

   Rated 4 out of 5

   Rob S – February 24, 2021

   I have used this sander a little since I got it and it has held up great. I would recommend it.0

8. 

   Rated 5 out of 5

   Dawn Hovis – November 4, 2021

   Too heavy